WONDERCAP ALL-IN-ONE SHOWER DRAIN

The Wondercap All-In-One Shower Drain is an essential shower drain device to any contractor (plumber/waterproofer/tiler) or bathroom renovator!

The shower drain is designed by a plumber, whose motto is "get rid of the water". Any good plumber's goal is to get the water out of the home and efficiently down the drain! And that is exactly what the Wondercap does!

The Wondercap is the perfect shower drain and strainer to help you or your contractor create the perfect waterproofed shower pan and premium chrome finish!

The tile shower drain outlet is a three layer design that enables the shower pan liner to be triple sealed with a silicone solvent. No holes or punctures to the shower pan liner. This results in a perfect shower pan liner seal, with no more 'inevitable shower pan liner leaks'.

DIAGRAM:

WONDERCAP 3 INCH X 2 INCH OUTER FLANGE - Bottom Layer (1)

The outer puddle flange of the Wondercap is installed into the timber or concrete with screws. The layer has screw holes, making the first part of the installation easy and efficient.

This layer is where the shower pan liner would be laid using the hole within the puddle flange as a guide to cutting the perfect opening for the inner flange to securely sit.

WONDERCAP 3 INCH INNER FLANGE - Middle Layer (2)

The inner puddle flange is pushed into the outer flange securing the pan liner into place. A silicone solvent is used under the pan liner to the outer flange and around and underneath the inner flange, creating that triple seal technology.

WONDERCAP 4 INCH X 3 INCH BASE - Top Layer (3)

The base is inserted into the inner flange, with mobility to adjust the height or the angle of the drain. Allowing a perfectly accurate and level strainer and tile installation.

WONDERCAP 4 INCH CAP (4)

The shower drain cap is used to stop any mortar or sand mix entering the drain during installation. It can also be used as a guide for cutting the tiles around the drain.

WONDERCAP 4 INCH CHROME BRASS STRAINER - ROUND OR SQUARE (7)

The chrome strainer is then installed once tiling and grout is finished. The strainer is installed as a finishing touch, and because it is the last step it is clean and perfect!